G1662
G1662

Guardian Emergency Shower, Free Standing, Plastic Shower Head MODEL : G1662

Eye/Face Wash, Pedestal Mounted, Stainless Steel Bowl, Arca Timur Guardian Eye/Face Wash, Pedestal Mounted, Stainless Steel Bowl MODEL : G1760

Application: Free standing emergency shower.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.

Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.

Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers on vertical piping for high visibility and corrosion resistance.

Supply: 1 1/4″ NPT female top or side inlet.

Sign: ANSI-compliant identification sign.

SKU: G1662 Categories: ,
  • Description
  • Downloads

Description

AVAILABLE OPTIONS

  • SSH Stainless steel shower head.
  • PCC All-polished chrome plated brass construction.
  • GRN Safety green ABS plastic shower head.
  • YEL Safety yellow ABS plastic shower head.
  • HS Auxiliary hand-held drench hose for rinsing eyes, face or body. Unit has single FS-Plus™ spray type outlet head, self-closing valve with squeeze handle, 8 ft. reinforced PVC hose and mounting bracket.
  • AP275-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware.
  • AP250-015 Modesty curtain for horizontal shower installation.
  • G3800LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2014. Refer to Tempering Valves section for complete technical and product selection information.

Technical Information

Catalog Page

Parts / O&M

Written Specs

Related Products

  •
    Read more
    Quick View

    GUARDIAN AQUAGUARD GRAVITY-FLOW PORTABLE EYEWASH,16 GALLON MODEL : G1540

    Application: Self-contained 16 gallon gravity flow eyewash unit uses gravity to deliver water through dual spray heads. Unit delivers over eight gallons (30 liters) of water for fifteen minutes, thus complying with the provisions of ANSI Z358.1-2009 for eyewashes. Unit has a rugged plastic tank that can be installed in a wide variety of locations. Unit is ideal for use where a continuous supply of potable water is not available, especially in remote plant areas, low traffic and/or low hazard areas.Tank: 16 gallon capacity safety green polyethylene tank. Tank has built-in carrying handle, heavy wall construction and reinforced ribs to support weight of unit.Spray Head Assembly: Water flow is activated by pulling down on bright yellow eye wash tray. Integral full flow nozzles deliver soft spray of water. Swing tray up to storage position to stop flow.Drain: Waste water is directed into drain opening in tank basin. 3 ft. long drain hose in basin directs discharge into floor drain, storage tank or other receptor.Mounting: Furnished with epoxy coated steel bracket for mounting unit on wall. Unit can also be placed on countertop or other flat surface.Preparation: Top operate unit, fill unit with clean potable water and add bacteriostatic additive (supplied with unit). Additive protects against growth of bacteria, fungus, algae and acanthamoeba. Unit should be inspected regularly and water in unit should be changed at least once every six months.Discharge Time: Eyewash delivers over .5 gallons per minute for 15 minutes.Weight: 13 lbs. (5.9 kg.) empty, 158 lbs. (71 kg.) full.Quality Assurance: Unit is completely assembled and water tested prior to shipment.

    Features and Specs:

    • Tank has built-in carrying handle, heavy wall construction and reinforced ribs to support weight of unit.
    • Water flow is activated by pulling down on bright yellow eye wash tray.
    • Swing tray up to storage position to stop flow.
    • Waste water is directed into drain opening in tank basin.
    • Unit can also be placed on countertop or other flat surface.
    • Unit should be inspected regularly and water in unit should be changed at least once every six months.
    Read more
    Quick View
  •
    Read more
    Quick View

    GUARDIAN TEMPERING VALVE, 6 GALLON CAPACITY MODEL : G3600LF

    Mixing valve, thermostatic, for eyewash assembly, blends hot and cold water to deliver warm (tepid) water, use with G1814BC eyewash unit, sold by the each

    Read more
    Quick View
  •
    Read more
    Quick View

    GUARDIAN RECESSED SAFETY STATION WITH DRAIN PAN AND DAYLIGHT DRAIN, EXPOSED SHOWER HEAD MODEL : GBF2152

    Application: Recessed barrier-free eye/face wash and shower safety station with ceiling mounted exposed shower head and drain pan. Stainless steel cover provides attractive appearance and protects unit when not in use. When activated, cover serves as pan to collect waste water and return it into unit for drainage. Rather than connecting to building drainage system, unit has 1” IPS stainless steel drain on front of unit for waste water. Front drain provides for less costly installation while facilitating regular testing of unit.

    ADA Compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.

    Shower Head: 10″ diameter stainless steel with 20 GPM flow control. Furnished with vertical supply pipe and ceiling escutcheon for mounting shower head at desired height below finished ceiling.

    Shower Valve: 1″ IPS brass stay-open ball valve with stainless steel “panic bar” actuator.

    Cover/Drain Pan: 16 gauge stainless steel combination cover and drain pan. Grasping “panic bar” handle and opening cover pulls spray head assembly down from vertical to horizontal position, activating water flow. While unit is in operation, waste water is collected in drain pan and re-directed to daylight drain for drainage out the front of unit. Unit remains in operation until cover is returned to closed position.

    Eye/Face Wash Spray Head Assembly: Two FS-Plus™ spray heads mounted on supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water flow.

    Eye/Face Wash Valve: 1/2″ IPS brass plug-type valve with O-ring seals. Furnished with in-line strainer to protect valve from debris and foreign matter.

    Mounting: 16 gauge stainless steel cabinet with flange featuring 3/8″ return for recessed mounting in wall. Unit fits in standard 3-5/8″ deep wall.

    Pipe And Fittings: Exposed pipe and escutcheon are brushed stainless steel.

    Supply: 1″ NPT female inlet.

    Waste: 1″ IPS stainless steel drain elbow on front of unit.

    Sign: ANSI-compliant identification sign.

    Quality Assurance: Unit is completely assembled and water tested prior to shipment.

    Read more
    Quick View
  •
    Read more
    Quick View

    GUARDIAN RECESSED SAFETY STATION WITH DRAIN PAN, EXPOSED SHOWER HEAD MODEL : GBF2150

    Application: Recessed barrier-free eye/face wash and shower safety station with ceiling mounted exposed shower head and drain pan. Stainless steel cover provides attractive appearance and protects unit when not in use. When activated, cover serves as pan to collect waste water and return it into unit for drainage.

    ADA Compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.

    Shower Head: 10″ diameter stainless steel with 20 GPM flow control. Furnished with vertical supply pipe and ceiling escutcheon for mounting shower head at desired height below finished ceiling.

    Shower Valve: 1″ IPS brass stay-open ball valve with stainless steel “panic bar” actuator.

    Cover/Drain Pan: 16 gauge stainless steel combination cover and drain pan. Grasping “panic bar” handle and opening cover pulls spray head assembly down from vertical to horizontal position, activating water flow. While unit is in operation, waste water is collected in drain pan and returned into cabinet for drainage. Unit remains in operation until cover is returned to closed position.

    Eye/Face Wash Spray Head Assembly: Two FS-Plus™ spray heads mounted on supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water flow.

    Eye/Face Wash Valve: 1/2″ IPS brass plug-type valve with O-ring seals. Furnished with in-line strainer to protect valve from debris and foreign matter.

    Mounting: 16 gauge stainless steel cabinet with flange featuring 3/8″ return for recessed mounting in wall. Unit fits in standard 3-5/8″ deep wall.

    Pipe And Fittings: Exposed pipe and escutcheon are brushed stainless steel.

    Supply: 1″ NPT female inlet.

    Waste: 2″ NPT female outlet.

    Sign: ANSI-compliant identification sign.

    Quality Assurance: Unit is completely assembled and water tested prior to shipment.

    Read more
    Quick View
  • Combination Steady-On Light and Alarm Horn for Safety Stations, Arca Timur
    Read more
    Quick View

    GUARDIAN COMBINATION STEADY-ON LIGHT AND ALARM HORN FOR SAFETY STATIONS MODEL : AP275-100

    Application: Combination steady-on light and alarm horn unit for safety stations. Steady-on light activates and alarm horn sounds loudly when eyewash or shower is activated.

    Installation: Unit is designed for use with combination safety stations, and can be mounted on either the vertical pipe of the station or on a wall adjacent to the unit. 120 volt, 0.3 amp electrical supply is required.

    Visual Signal: 14 watt, 1060 lumen LED light with weatherproof, shatter-resistant amber lens and protective metal grid.

    Audible Signal: Weatherproof horn delivers distinctive, urgent signal. Volume is preset at 100 db at 10 feet. An adjustment screw on the front of horn allows adjustment of output sound level.

    Flow Switch: 1-1/4″ IPS single pole, double throw waterproof flow switch for installation in water supply line to emergency unit. Switch senses flow of water when either the eyewash or shower is activated. Flow switch must be installed with tee fitting in horizontal position, flow switch body in vertical position and at least 6″ from closest fitting. Direction of flow is marked on switch body.

    Mounting: Furnished complete with bracket for mounting on vertical pipe or wall, junction box and 5 foot flexible NEMA 4X cord and receptacle. Electrical connection by others.

    Quality Assurance: Unit is fully assembled, wired and factory tested prior to shipment.

    Read more
    Quick View
  • Recessed Safety Center with Drain Pan, Exposed Shower Head, Arca Timur
    Read more
    Quick View

    GUARDIAN RECESSED SAFETY CENTER WITH DRAIN PAN, EXPOSED SHOWER HEAD MODEL : GSC2650A

    Application: Recessed safety center with barrier-free eye/face wash and shower safety station, matching fire extinguisher housing, ceiling mounted exposed shower head, and drain pan. Stainless steel cover provides attractive appearance and protects unit when not in use. When activated, cover serves as pan to collect waste water and return it into unit for drainage. The integrated fire extinguisher housing creates a cohesive aesthetic for all safety equipment requirements in one location.

    ADA Compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.

    Shower Head: 10” diameter stainless steel with 20 GPM flow control. Furnished with vertical supply pipe and ceiling escutcheon for mounting shower head at desired height below finished ceiling.

    Shower Valve: 1” IPS brass stay-open ball valve with stainless steel “panic bar” actuator.

    Cover/Drain Pan: 16 gauge stainless steel combination cover and drain pan. Grasping “panic bar” handle and opening cover pulls spray head assembly down from vertical to horizontal position, activating water flow. While unit is in operation, waste water is collected in drain pan and returned into cabinet for drainage. Unit remains in operation until cover is returned to closed position.

    Eye/Face Wash Spray Head Assembly: Two FS-Plus™ spray heads mounted on supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water flow.

    Eye/Face Wash Valve: 1/2″ IPS brass plug-type valve with O-ring seals. Furnished with in-line strainer to protect valve from debris and foreign matter.

    Mounting: Unit is comprised of (2) modular 16 gauge stainless steel cabinets. Each cabinet flange features 3/8” return for recessed mounting in wall.

    Supply: 1” NPT female inlet.

    Waste: 2” NPT female outlet.

    Sign: ANSI-compliant identification sign.

    U.S. Patent 5,768,721

    Read more
    Quick View
  •
    Read more
    Quick View

    GUARDIAN BARRIER-FREE WIDEAREA EYE/FACE WASH, WALL MOUNTED MODEL : GBF1724

    Application: Barrier-Free WideArea™ eye/face wash for wall mounting. Bowl is lowered and extended to permit access by wheelchair user. Profile of unit is “flattened” to comply with maximum height and knee clearance requirements.

    ADA Compliance: When installed at recommended mounting height, unit complies with ADA requirements for accessibility by handicapped persons (maximum height and reach, minimum knee clearance and distance from obstructions).

    Spray Head Assembly: Four GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

    Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.

    Bowl: 11-1/8″ diameter stainless steel.

    Mounting: Welded stainless steel wall bracket.

    Supply: 1/2″ NPT female inlet.

    Waste: 1-1/2″ OD chrome plated brass tailpiece.

    Sign: ANSI-compliant identification sign.

    Quality Assurance: Unit is completely assembled and water tested prior to shipment.

    Read more
    Quick View
  •
    Read more
    Quick View

    GUARDIAN CLEAR VINYL COVER FOR AQUAGUARD 16 GALLON PORTABLE EYEWASH MODEL : G1540CVR

    Cover, EQUIPMENT G1540CVR G1540CVR, SKU: G0657091 Product Details Flange, Features In.
    Mounting With and Drench About Us small business stay competitive! We offering of products low prices. historically been at disadvantage who at of their size. want change Zoro has the “big we offer one There are discount structures to understand.
    Every the same an you to or one We have our headquarters in Grove, petitioning town rename (We’re Buffaloes.) Like believe that always put our customers first.

    Read more
    Quick View
  • EyeSafe™ Faucet-Mounted Eyewash with Faucet Control Valve, Arca Timur
    Read more
    Quick View

    GUARDIAN EYESAFE FAUCET-MOUNTED EYEWASH WITH FAUCET CONTROL VALVE MODEL : G1200

    Application: EyeSafe™ faucet-mounted eyewashes convert any faucet into an emergency eyewash station without interfering with normal faucet operation. An EyeSafe™ unit can be installed at any sink, close to where accidents might occur. In an emergency, the unit is quickly located and activated, and provides an unlimited supply of potable water for rinsing the user’s eyes. Faucet control valve offers single motion eyewash activation by allowing the pull knob to control water flow while the faucet remains ‘on’ at a preset temperature.

    Operation: Unlike conventional faucet-mounted eyewashes, the G1200 offers the ability to activate the eyewash in a single motion. The unit is equipped with a diverter valve for the eyewash and a separate control valve for the faucet. Once the unit is installed on a faucet, the faucet may be opened and left “on” to a preset temperature. To use the faucet, the flow of water is controlled by a quarter-turn ball valve and knob at the bottom of the eyewash. To use the eyewash, simply pull the knob on the front of the eyewash. Since the faucet is open, this is the only step required to activate the eyewash. Water pressure holds the eyewash in operation, leaving the user’s hands free. To return to normal faucet operation, push the knob in or turn off the faucet.

    Outlet Heads: Outlet heads are mounted 3″ apart and deliver a soft, aerated flow of water. Heads angle forward toward user. Angle of heads is adjustable to permit full coverage and avoid splashing. Furnished with float-off dust covers to protect outlet heads.

    Eyewash Valve: Forged brass diverter valve.

    Faucet Control Valve: Quarter turn ball valve with chrome plated brass ball, molded PTFE seals and plastic handle.

    Inlet: Body has 55/64″-27 female thread. Furnished with three adaptors (15/16″-27, 13/16″-27 and 3/8″ NPS) for installing on most commonly used faucets, including laboratory-type faucets.

    Outlet: Furnished with removable aerator on bottom.

    Quality Assurance: Each unit is completely assembled and water tested prior to shipment.

    Important: Faucet-mounted eyewashes are intended solely as supplemental units in addition to dedicated, plumbed eyewash equipment installed in the workplace.

    Faucet-mounted eyewashes should be used with cold or warm water only. Use of hot water might cause scalding.

    Leaving a faucet “on” with a valve at the outlet closed can cause cross-mixing of the hot and cold water. The water supply lines or the faucet should be furnished with check valves to prevent such mixing from occurring. This unit should not be installed on a faucet with an atmospheric vacuum breaker, as the faucet control valve downstream of the vacuum breaker will interfere with its function. Guardian Equipment recommends consulting with local plumbing code authorities prior to installing this unit.

    Read more
    Quick View
  • Eyewash/Drench Hose Unit, Wall Mounted, 12 Coiled Hose, Ball Valve with Flag Handle, Arca Timur
    Read more
    Quick View

    Guardian Eyewash/Drench Hose Unit, Wall Mounted, 12’ Coiled Hose, Ball Valve with Flag Handle MODEL : G5014

    Application: Dual purpose eyewash/drench hose with ball valve and flag handle for wall mounting. Unit meets the provisions of ANSI Z358.1-2014 as both an eyewash and a drench hose. Unit may be left in the mounting bracket for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body. 12’ nylon retractable hose coils to eliminate trip hazard.

    Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

    Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.

    Hose: 12′ reinforced nylon retractable coiled hose. 180 PSI maximum working pressure.

    Mounting: Bracket with spring clips to hold unit on wall. Clips assure that spray heads face forward at all times.

    Supply: 3/8″ NPT female inlet.

    Sign: ANSI-compliant identification sign.

    Quality Assurance: Unit is completely assembled and water tested prior to shipment.

    Read more
    Quick View